"""
Supporting mathematical and radiometric calculations.
辅助数学和辐射度计算。
"""
import numpy as np
import pandas as pd
[docs]
def calc_kt(ghi, zenith, bni_extra, min_mu0=0.065,
max_clearness_index=2.0):
"""
Calculates clearness index ($k_t$) following pvlib conventions [1]_ [2]_ [3]_.
按照 pvlib 惯例计算晴朗指数 ($k_t$)。
$k_t = G_h / (E_{0n} \\cdot \\max(\\mu_0,\\; \\text{min\\_mu0}))$
Parameters
----------
ghi : numeric or Series
Measured global horizontal irradiance ($G_h$). [W/m^2]
测量的水平总辐照度 ($G_h$)。[瓦/平方米]
zenith : numeric or Series
True (not refraction-corrected) solar zenith angle ($Z$). [degrees]
真实（未经折射修正）太阳天顶角 ($Z$)。[度]
bni_extra : numeric or Series
Extraterrestrial beam normal irradiance ($E_{0n}$). [W/m^2]
地外法向辐照度 ($E_{0n}$)。[瓦/平方米]
min_mu0 : float, default 0.065
Minimum $\\mu_0$ for the denominator (equiv. ~86.3 deg).
分母中 $\\mu_0$ 的最小值（相当于 ~86.3 度）。
max_clearness_index : float, default 2.0
Upper clamp for $k_t$; 2.0 allows sub-hourly over-irradiance.
$k_t$ 的上限；2.0 允许亚小时尺度的超辐照事件。
Returns
-------
kt : numeric or Series
Clearness index ($k_t$), clamped to [0, max_clearness_index]. [unitless]
晴朗指数 ($k_t$)，限制在 [0, max_clearness_index]。[无单位]
References
----------
.. [1] Maxwell, E. L. (1987). A quasi-physical model for converting hourly
global horizontal to direct normal insolation. Technical Report No.
SERI/TR-215-3087, Golden, CO: Solar Energy Research Institute.
.. [2] Holmgren, W. F., Hansen, C. W., & Mikofski, M. A. (2018). pvlib
python: A python package for modeling solar energy systems. Journal of
Open Source Software, 3(29), 884.
.. [3] Anderson, K. S., Hansen, C. W., Holmgren, W. F., Jensen, A. R.,
Mikofski, M. A., & Driesse, A. (2023). pvlib python: 2023 project
update. Journal of Open Source Software, 8(92), 5994.
"""
mu0 = np.cos(np.radians(zenith))
ghi_extra = bni_extra * np.maximum(mu0, min_mu0)
# ghi_extra can be 0 (e.g. bni_extra == 0); avoid RuntimeWarning on divide.
with np.errstate(divide="ignore", invalid="ignore"):
kt = ghi / ghi_extra
kt = np.maximum(kt, 0)
kt = np.minimum(kt, max_clearness_index)
return kt
[docs]
def calc_kb(bni, zenith, bni_extra, min_mu0=0.065,
max_beam_transmittance=1.0):
"""
Calculates beam transmittance ($k_b$) following pvlib conventions [1]_ [2]_.
按照 pvlib 惯例计算直射透射率 ($k_b$)。
$k_b = B_n / E_{0n}$, floored at $\\mu_0 \\ge$ `min_mu0` for consistency,
clamped to [0, max_beam_transmittance].
Parameters
----------
bni : numeric or Series
Measured beam normal irradiance ($B_n$). [W/m^2]
测量的法向直接辐照度 ($B_n$)。[瓦/平方米]
zenith : numeric or Series
True (not refraction-corrected) solar zenith angle ($Z$). [degrees]
真实（未经折射修正）太阳天顶角 ($Z$)。[度]
bni_extra : numeric or Series
Extraterrestrial beam normal irradiance ($E_{0n}$). [W/m^2]
地外法向辐照度 ($E_{0n}$)。[瓦/平方米]
min_mu0 : float, default 0.065
Minimum $\\mu_0$ to allow; timestamps where $\\mu_0 <$ `min_mu0`
yield $k_b = 0$.
允许的最小 $\\mu_0$；当 $\\mu_0 <$ `min_mu0` 时 $k_b = 0$。
max_beam_transmittance : float, default 1.0
Upper clamp for $k_b$.
$k_b$ 的上限。
Returns
-------
kb : numeric or Series
Beam transmittance ($k_b$), clamped to [0, max_beam_transmittance]. [unitless]
直射透射率 ($k_b$)，限制在 [0, max_beam_transmittance]。[无单位]
References
----------
.. [1] Holmgren, W. F., Hansen, C. W., & Mikofski, M. A. (2018). pvlib
python: A python package for modeling solar energy systems. Journal of
Open Source Software, 3(29), 884.
.. [2] Anderson, K. S., Hansen, C. W., Holmgren, W. F., Jensen, A. R.,
Mikofski, M. A., & Driesse, A. (2023). pvlib python: 2023 project
update. Journal of Open Source Software, 8(92), 5994.
"""
mu0 = np.cos(np.radians(zenith))
with np.errstate(divide="ignore", invalid="ignore"):
kb = bni / bni_extra
kb = np.where(mu0 < min_mu0, 0.0, kb)
kb = np.maximum(kb, 0)
kb = np.minimum(kb, max_beam_transmittance)
return kb
[docs]
def calc_kd(dhi, zenith, bni_extra, min_mu0=0.065,
max_diffuse_transmittance=2.0):
"""
Calculates diffuse transmittance ($k_d$) following pvlib conventions [1]_ [2]_.
按照 pvlib 惯例计算散射透射率 ($k_d$)。
$k_d = D_h / (E_{0n} \\cdot \\max(\\mu_0,\\; \\text{min\\_mu0}))$
Parameters
----------
dhi : numeric or Series
Measured diffuse horizontal irradiance ($D_h$). [W/m^2]
测量的水平散射辐照度 ($D_h$)。[瓦/平方米]
zenith : numeric or Series
True (not refraction-corrected) solar zenith angle ($Z$). [degrees]
真实（未经折射修正）太阳天顶角 ($Z$)。[度]
bni_extra : numeric or Series
Extraterrestrial beam normal irradiance ($E_{0n}$). [W/m^2]
地外法向辐照度 ($E_{0n}$)。[瓦/平方米]
min_mu0 : float, default 0.065
Minimum $\\mu_0$ for the denominator (equiv. ~86.3 deg).
分母中 $\\mu_0$ 的最小值（相当于 ~86.3 度）。
max_diffuse_transmittance : float, default 2.0
Upper clamp for $k_d$; 2.0 allows sub-hourly over-irradiance.
$k_d$ 的上限；2.0 允许亚小时尺度的超辐照事件。
Returns
-------
kd : numeric or Series
Diffuse transmittance ($k_d$), clamped to
[0, max_diffuse_transmittance]. [unitless]
散射透射率 ($k_d$)，限制在 [0, max_diffuse_transmittance]。[无单位]
References
----------
.. [1] Holmgren, W. F., Hansen, C. W., & Mikofski, M. A. (2018). pvlib
python: A python package for modeling solar energy systems. Journal of
Open Source Software, 3(29), 884.
.. [2] Anderson, K. S., Hansen, C. W., Holmgren, W. F., Jensen, A. R.,
Mikofski, M. A., & Driesse, A. (2023). pvlib python: 2023 project
update. Journal of Open Source Software, 8(92), 5994.
"""
mu0 = np.cos(np.radians(zenith))
ghi_extra = bni_extra * np.maximum(mu0, min_mu0)
kd = dhi / ghi_extra
kd = np.maximum(kd, 0)
kd = np.minimum(kd, max_diffuse_transmittance)
return kd
def calc_k(dhi, ghi, zenith, min_mu0=0.065, max_diffuse_fraction=1.0):
"""
Calculates diffuse fraction ($k$) following pvlib conventions [1]_ [2]_.
按照 pvlib 惯例计算散射分数 ($k$)。
$k = D_h / G_h$, with $\\mu_0$ guard and output clamping.
Parameters
----------
dhi : numeric or Series
Measured diffuse horizontal irradiance ($D_h$). [W/m^2]
测量的水平散射辐照度 ($D_h$)。[瓦/平方米]
ghi : numeric or Series
Measured global horizontal irradiance ($G_h$). [W/m^2]
测量的水平总辐照度 ($G_h$)。[瓦/平方米]
zenith : numeric or Series
True (not refraction-corrected) solar zenith angle ($Z$). [degrees]
真实（未经折射修正）太阳天顶角 ($Z$)。[度]
min_mu0 : float, default 0.065
Minimum $\\mu_0$; timestamps where $\\mu_0 <$ `min_mu0`
yield $k = $ NaN.
允许的最小 $\\mu_0$；当 $\\mu_0 <$ `min_mu0` 时 $k = $ NaN。
max_diffuse_fraction : float, default 1.0
Upper clamp for $k$.
$k$ 的上限。
Returns
-------
k : numeric or Series
Diffuse fraction ($k$), clamped to [0, max_diffuse_fraction]. [unitless]
散射分数 ($k$)，限制在 [0, max_diffuse_fraction]。[无单位]
References
----------
.. [1] Holmgren, W. F., Hansen, C. W., & Mikofski, M. A. (2018). pvlib
python: A python package for modeling solar energy systems. Journal of
Open Source Software, 3(29), 884.
.. [2] Anderson, K. S., Hansen, C. W., Holmgren, W. F., Jensen, A. R.,
Mikofski, M. A., & Driesse, A. (2023). pvlib python: 2023 project
update. Journal of Open Source Software, 8(92), 5994.
"""
mu0 = np.cos(np.radians(zenith))
with np.errstate(divide="ignore", invalid="ignore"):
k = dhi / ghi
k = np.where(mu0 < min_mu0, np.nan, k)
k = np.maximum(k, 0)
k = np.minimum(k, max_diffuse_fraction)
return k
def calc_kappa(ghi, ghi_clear, max_clearsky_index=2.0):
"""
Calculates clear-sky index ($\\kappa$) following pvlib conventions [1]_ [2]_.
按照 pvlib 惯例计算晴空指数 ($\\kappa$)。
$\\kappa = G_h / G_{hc}$
Non-finite results are set to zero; NaN inputs are preserved.
非有限结果设为零；输入中的 NaN 保留。
Parameters
----------
ghi : numeric or Series
Measured global horizontal irradiance ($G_h$). [W/m^2]
测量的水平总辐照度 ($G_h$)。[瓦/平方米]
ghi_clear : numeric or Series
Modeled clear-sky global horizontal irradiance ($G_{hc}$). [W/m^2]
模拟的晴空水平总辐照度 ($G_{hc}$)。[瓦/平方米]
max_clearsky_index : float, default 2.0
Upper clamp for $\\kappa$; 2.0 allows sub-hourly over-irradiance.
$\\kappa$ 的上限；2.0 允许亚小时尺度的超辐照事件。
Returns
-------
kappa : numeric or Series
Clear-sky index ($\\kappa$), clamped to [0, max_clearsky_index]. [unitless]
晴空指数 ($\\kappa$)，限制在 [0, max_clearsky_index]。[无单位]
References
----------
.. [1] Holmgren, W. F., Hansen, C. W., & Mikofski, M. A. (2018). pvlib
python: A python package for modeling solar energy systems. Journal of
Open Source Software, 3(29), 884.
.. [2] Anderson, K. S., Hansen, C. W., Holmgren, W. F., Jensen, A. R.,
Mikofski, M. A., & Driesse, A. (2023). pvlib python: 2023 project
update. Journal of Open Source Software, 8(92), 5994.
"""
with np.errstate(divide="ignore", invalid="ignore"):
kappa = ghi / ghi_clear
kappa = np.where(~np.isfinite(kappa), 0.0, kappa)
input_nan = ~np.isfinite(ghi) | ~np.isfinite(ghi_clear)
kappa = np.where(input_nan, np.nan, kappa)
kappa = np.maximum(kappa, 0)
kappa = np.minimum(kappa, max_clearsky_index)
if isinstance(ghi, pd.Series):
kappa = pd.Series(kappa, index=ghi.index)
return kappa
